Products

FLEETWATCH Vehicle Mileage, ID, Location & Data Capture Devices

Everything needed to get real-time or historical vehicle data from your vehicles transferred electronically to your FLEETWATCH System

JX200 J1939/J1708 Data Logger Module

PRODUCT FEATURES

The FLEETWATCH® Model JX200 Data Recorder connects to an existing SAE J1939 or J1708 connector on a vehicle. Data described below can be collected and reported on demand to a FLEETWATCH® RF Transceiver (TX200) for transmission to a wayside receiver station (FR200). The vehicle engine and transmission must have electronics necessary to output the requested information through the J1939/J1708 connector. The JX200 unit is user programmed with the vehicle number.

FAULT INDICATORS CAPTURED AND REPORTED

Fault Codes reported include Subsystem ID and Failure Mode Identifier as defined in SAE documentation. The JX200 reports the last 10 unique Active Fault Codes reported with the Date and Time of the beginning of the last occurrence observed. The JX200 can also look for specific fault codes and alert users at the next servicing if that code was recorded during the trip.

PROGRAMMING JX200 WITH VEHICLE ID

Vehicle ID can be programmed into the JX200 wirelessly using a Mobile Reader and Programmer. JX units may be programmed even while installed on a vehicle. The MR programmer is totally self contained and does not require a laptop or other PC to read or program the JX200 or other units.

INTEGRATED WITH FLUID MANAGEMENT SYSTEM

The JX200 Data Logger, integrated with the FLEETWATCH® Fluid Management System, allows automatic collection of vehicle number, life-to-date mileage, engine hours and quantities of fuel and fluids dispensed, as well as engine fault codes and other data obtained through the J1939/J1708 interface.


OBD200 Mileage and Data Logger Module

PRODUCT FEATURES

The OBD200 Mileage Tracking Module automatically counts and records miles traveled via a vehicle's existing OBD-II diagnostic port.

FAULT INDICATORS CAPTURED AND REPORTED

Fault Codes reported include Subsystem ID and Failure Mode Identifier as defined in SAE documentation. The JX200 reports the last 10 unique Active Fault Codes reported with the Date and Time of the beginning of the last occurrence observed. The JX200 can also look for specific fault codes and alert users at the next servicing if that code was recorded during the trip.

When the OBD200 receives a beacon signal from a receiving unit (see RECEIVER OPTIONS), it transmits the preprogrammed vehicle number, the life-to-date mileage of the vehicle, and coded data, including information on the status of the battery powering the unit, to the receiver. The data collected can be downloaded directly to an output device to generate mileage reports, or it can be combined with data collected from other FLEETWATCH® devices (see INTEGRATION WITH FLEETWATCH® FLUID MANAGEMENT SYSTEM) allowing completely automatic collection of vehicle number, life-to-date mileage, and amounts of all fluids dispensed.